H375XW360XD420 High quality soft protection Abs plastic lockers for school
features
Use needle valve type hot runner mold with constant temperature, gas-assisted injection molding, and fully automated production; adopt one-time injection molding.
The cabinet door handle has an oval anti-pry design. Multiple 90° angle steps are used at the backhand position of the door to form a blocking plate and the front of the door to form a stepped anti-pry design. The door handle is equipped with two fixed buckles and an elastic clip. Buckle to enhance the anti-theft function when installing mechanical locks or other locks.
Design to prevent the cabinet door from falling off
The door panel adopts one-piece molding process. When leaving the factory, the door panel is one-piece. The surface of the door panel adopts a flat design and the color is macaron color, which is fashionable and elegant. The outer surface of the door panel is surrounded by high-gloss bevel cutting surfaces (specifications: 10*1mm), except for the beveled cutting surfaces around the door panel, the rest of the exterior surfaces are all etched surfaces. Without producing large-area reflections, the four cutting surfaces are used to increase the three-dimensional sense of the lockers. The upper and lower sides of the door panel open. Two corners are equipped with TPR high-elastic soft rubber anti-collision corners to prevent accidental injuries caused by head hitting the sharp corners of the door panel when standing up to store items.
The rear panel ventilation window blinds are designed with a total ventilation area of 250mm². The exhaust window adopts a circular arrangement composed of 7 long strips. The maximum width of the air holes is 0.17mm. Each long strip of ventilation holes consists of two staggered upper and lower strips. It is composed of pages, making it difficult for water droplets or water vapor to enter the cabinet through the ventilation holes, and at the same time preventing small insects from entering the interior of the cabinet. It has a better exhaust effect and avoids the odor caused by the lack of air circulation in the cabinet.
